Motion Decay Settings - Sony MVS-8000X User Manual

• When you do not combine images, the Trail effect only is applied, regardless
of the selection in the <Combine Process> group.
Select one of the following in the <Combine Process> group.
Combine –> Trail: Add the Trail effect after the combine. As the trail
parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
Trail –> Combine: Add the Trail effect before the combine. Trails parameters
can be set independently for each channel.
Combine –> Trail

Motion Decay Settings

Notes
When you turn on motion decay, if the Trail, Keyframe Strobe or Wind effect
is on, it automatically goes off.
Blurring image motion
1
In the DME menu, select VF5 'Light/Trail' and HF3 'Motion Decay.'
The Motion Decay menu appears.
2
Press [Motion Decay], turning it on.
This enables motion decay, and you can now use the knobs to adjust the
parameters.
3
Set the following parameter.
Trail –> Combine
DME Special Effect Operations
141