Sony MVS-8000X User Manual page 325

5
To enter the number of the desired snapshot save destination
register using the numeric keypad
After step 2 above, press the [10 KEY] button in the memory recall section.
This switches the memory recall section to the numeric keypad input mode,
and after pressing the [STOR] button, lighting it yellow, you can enter the
desired register number from the numeric keypad. The number you entered
appears in the alphanumeric display.
To find an empty register, press the [ . ] button without entering a number, and
the number of an empty register appears in the alphanumeric display.
Confirm the displayed number by pressing the [ENTR] button. This saves the
data in the specified register.
To cancel a snapshot save operation
After saving a snapshot, to cancel the save, hold down the [STORE STATS]
button and press the [UNDO] button.
The light of [STORE STATS] button changes from amber to green.
Notes
With a simple type Flexi Pad control block, it is not possible to cancel saving
a snapshot.
Adding attributes in the Multifunction Flexi Pad control block
1
324
Snapshot Operations in the Multifunction Flexi Pad Control Block
Hold down the [SNAPSHOT] button, and press the button in the memory
recall section corresponding to the register in which you want to save.
Notes
If you press a button which is lit orange or yellow, this overwrites the
contents of the corresponding register.
The button you pressed lights yellow, and this completes saving. The
[STORESTATS] button lights amber, and the numeric display shows the
bank number followed by the number of the selected register.
Press the [EDIT ENBL] button.
The button indications in the memory recall section change as shown in the
following illustration.
To cancel adding attributes, press the [EDIT ENBL] button once more, or
press the [EXIT] button.