Sony MVS-8000X User Manual page 440

Notes on transferring multiple frame memory files together to a
memory card
• Transferring all of the files within frame memory together fails if the
capacity of the memory card is too small to hold all of the images. In this
case, replace with a larger capacity memory card, or delete files until saving
is possible.
The following table roughly shows the relation between memory card
capacity and number of files that can be saved.
Memory card capacity
256 MB
Note that when transferring to the hard disk, there is ample capacity, so that
problems such as this do not occur.
• If you cancel the operation during a data transfer between frame memory and
hard disk or memory card, then an image which was not completely
transferred will not be reproducible. Avoid canceling such operations.
• When loading a file from hard disk or memory card, if [Freeze Enable] in the
Freeze menu is on, the loaded file may sometimes be overwritten by the
frame memory input image.
To avoid this when loading a file, ensure that [Freeze Enable] is turned off.
Importing or exporting files to or from frame memory
Import: Import a file in a different format from hard disk or memory card into
frame memory after changing its format.
Export: Export a file in a register to hard disk or memory card after changing
its format.
You can import TIFF, BMP, and TARGA files as follows into frame memory.
File type Format
TIFF file RGB
uncompressed
format
BMP file a)
Windows
bit format
TARGA file RGB
uncompressed/
compressed
format
PNG file RGB
compressed
format
Number of files that can be saved
SD system
214
File name
Maximum eight
characters, plus
extension .tif required
Maximum eight
24-
characters, plus
extension .bmp required
Maximum eight
characters, plus
extension .tga required
Maximum eight
characters, plus
extension .png required
HD system (except 720P)
46
Notes
• Layers cannot be used.
• If an alpha channel is
present, two files are
created as a pair.
–
• Layers cannot be used.
• If an alpha channel is
present, two files are
created as a pair.
• Layers cannot be used.
• If an alpha channel is
present, two files are
created as a pair.
Overview of File Operations
439