Sony MVS-8000X User Manual page 400

In the On Line Edit menu, you can check the control panel operating sequence
in the menu. You can also carry out editing using the control panel and menu.
To display the On Line Edit menu
1
Recall the macro register (1 to 250) you want to edit with the control panel,
and select the macro editing mode
1) With the numeric keypad control block, keyframe control block, Flexi Pad control block,
or Multifunction Flexi Pad control block assigned to macro editing (see step 2 in
"Specifying an edit point" (page 373), step 3 in "Creating and Saving a Macro" (page
384), step 2 in "Creating a macro" (page 390), and step 1 "Recalling a Macro Register
and Executing a Macro" (page 389)).
2
In any of the following menus, select the same register as the register
recalled in step 1, and press [On Line Edit] in the button area.
• Macro >Register >Lock menu
• Macro >Register >Delete menu
• Macro >Register >Rename menu
• File >Shotbox, Macro >Macro >File Edit menu
The On Line Edit menu appears, and you can now carry out online editing
of the events held in the recalled register. Meanwhile, the control block of
the control panel operated in step 1 is assigned to control editing
operations.
Notes
In the following cases, [On Line Edit] is disabled, and it is not possible to
display the On Line Edit menu.
• When the recalled register and the register selected in the menu are
different.
• When a device other than [Register] is selected ([HDD] or [Memory
Card]) in the File >Shotbox, Macro >Macro >File Edit menu.
• If the recalled register is locked.
1)
.
Macro Editing Using Menus
399