Sony MVS-8000X User Manual page 115

To apply the Split effect
With the Split menu displayed, use the following procedure.
1
2
To set the split position
1
2
Split Slide settings
You can set the degree of transition, the degree of randomness in the distance
moved by each block, the degree of sliding, block width, block angle, and other
parameters.
114
DME Special Effect Operations
In the <Mode> group, select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
Set the following parameters.
Knob Parameter Adjustment
1 Transition H Degree of left and right separation –100.00 to +100.000
2 Transition V Degree of top and bottom
separation
Knob Parameter Adjustment
1 Top Amount of movement of top
2 Left Amount of movement of left
3 Right Amount of movement of right
4 Bottom Amount of movement of bottom
Press [Position].
Set the following parameters.
Knob Parameter Adjustment
1 H Degree of left and right
separation
2 V Degree of top and bottom
separation
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Parameter group [1/2]
Parameter group [2/2]
Setting values
–100.00 to +100.000
Setting values
–100.00 to +100.000
–100.00 to +100.000
–100.00 to +100.000
–100.00 to +100.000
Setting values
a)
–4.000 to +4.000
b)
–16.000 to +16.000
a)
–3.000 to +3.000
b)
–12.000 to +12.000