Sony MVS-8000X User Manual page 131

Resetting the corner positions
In the Corner Pinning menu, press [Reset Corner].
Selecting the area used for pinning
When the foreground is cropped, press [Crop Link] to select either of the
following.
On: Use the area of the cropped image for positioning
Off: Use the area of the entire image, including the part hidden by cropping
Area positioned by pinning when Crop Link
is On
Adjusting the density of the foreground
You can adjust the density of the foreground image to be translucent so that the
background shows through, making it easier to position the corners.
Notes
This setting is not saved in a key frame or snapshot.
1
2
130
DME Special Effect Operations
a) When the selection for operation is "All," the Top Left value appears, and the knobs move
all four corners correspondingly.
(shaded in the diagram below) for positioning
(The bold frame shows the area used for positioning.)
In the Corner Pinning menu, set [Video Through] to On.
Turn the knob to adjust the following parameter.
Knob Parameter Adjustment
4 Density Image density
Area positioned by pinning when Crop
Link is Off
Setting values
0.00 to 100.00