Mono Settings - Sony MVS-8000X User Manual

Multi format switcher system with ccp-8000 series center control panel volume 2
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

The Sepia effect is enabled. You can adjust the degree of mixing between
the sepia image and the original image with the knobs.
3
Set the following parameters.
Knob
1
2
3
4
To set the color of the sepia image, press [Sepia Color], turning it on, and
adjust the parameters.
Knob
1
2
3
Masking the Sepia effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 94).

Mono Settings

Applying the Mono effect
1
In the DME menu, select VF2 'Video Modify' and HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Mono], turning it on.
The Mono effect is enabled. The color image changes to monochrome.
Masking the Mono effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 94).
Parameter
Adjustment
Mix Y
Y signal mix amount
Mix C
Chroma signal mix amount
Mix All
Y signal and chroma signal mix
amount
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Setting values
0.00 to 100.00
0.00 to 100.00
Mix Y value shown
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
85

Advertisement

Table of Contents
loading

Table of Contents