In this mode, you can use the following buttons for macro creation, editing,
saving, and deletion.
[EXIT] button: Forcibly exit editing mode.
[UNDO] button: Undo the last macro event insertion, modification, deletion,
paste, or other operation.
[PAUS] button: Insert a pause event (see page 377).
[AUTO INS] button: Toggle auto insert mode on or off (see page 372).
[COPY] button: Copy a macro event (see page 376).
[PSTE] button: Paste a macro event (see page 377).
[ALL] button: Select all macro events (see page 375).
[STOR] button: Save the macro (see page 378).
[INS] button: Insert a macro event (see page 374).
[MOD] button: Modify a macro event (see page 374).
[DEL] button: Delete a macro event (see page 375).
[FROM TO] button: Switch to the mode for entering a value range with the
numeric keypad (see page 375).
[SHFT] button: Move a macro event (see page 376).
[<< PREV] button: Move the edit point to the previous event (see page 392).
[>> NEXT] button: Move the edit point to the next event (see page 392).
[GOTO EVNT] button: Switch to the mode for specifying an event to move
to with the numeric keypad (see page 373).
Macro Operations in the Multifunction Flexi Pad Control Block
397