Setting The Delay - Sony MVS-8000X User Manual

Multi format switcher system with ccp-8000 series center control panel volume 2

Hide thumbs Also See for MVS-8000X:

Table of Contents

In addition to the above operation, the effect duration may also be changed

as a result of inserting or deleting keyframes. See "Time Settings" (page

Setting the Delay

To set the delay (see "Delay setting" (page 235)), use the following procedure.

Press the [EDIT ENBL] button, turning it on.

Press the [DELAY] button, turning it on.

The display in the numeric keypad control block shows "DELAY"

followed by the delay time (seconds:frames).

Using the numeric keypad in the numeric keypad control block, enter the

timecode value for the delay, as a maximum of four digits.

You can also use the [TRIM] button to enter a difference value. (See "To

enter a difference value" (page 261).)

Press the [ENTER] button to confirm the entry.

This changes the delay setting.

Time Settings