Wipe Crop Settings - Sony MVS-8000X User Manual

(For HD format and 16: 9 mode: Size V = 1.50)
6
Press [Skew], turning it on, and use knob 1 to set the Skew H parameter so
that the parallel lines appear to emerge from the depth at the right.
(For HD format and 16:9 mode: Skew H = –50.00)

Wipe Crop Settings

Notes
• The wipe crop function is not supported on the MVE-8000A.
• When wipe crop is on, any mask that was on is turned off.
• When brick is on, wipe crop cannot be turned on. To turn wipe crop on, it is
first necessary to turn brick off.
• In the <Shaped Video> group of the Video/Key menu, when [Output] is off,
unless you set [Bkgd] in the HF1 'Bkgd' menu to on, the wipe crop effect
will not function.
Applying the wipe crop effect
To select the pattern
1
In the DME menu, select VF1 'Edge' and HF6 'Wipe Crop.'
The Wipe Crop menu appears.
2
Press [Wipe Crop], turning it on.
3
Press [Pattern Select].
The Pattern Select menu appears.
4
From the displayed patterns (standard wipe patterns 1 to 24 and 304), press
any pattern to select it.
In this state, you can use the knobs to adjust the size of the pattern. (For
details of parameters, see the next item.)
To set the pattern size and position
1
In the Wipe Crop menu, press [Position/Size].
2
Set the following parameters.
DME Special Effect Operations
75