Spotlighting Settings - Sony MVS-8000X User Manual

Knob
1
2
3
Mix Color: Insert a mix color signal (see page 79) in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext IN connector in the
afterimage portion.
Rainbow: Use a freeze image with the hue changing every frame in the
afterimage portion. The difference from "Hue Rotate" is that many colors
appear simultaneously.
For details of the Rainbow parameters, see the "Hue Rotate" item above.
Applying modulation to the afterimage portion (Modulation)
1
In the Wind menu, press [Modulation], turning it on.
2
Set the following parameters.
Knob
1
2
3
4
For details of Priority, Wind Freeze Timing, Wind Eraser, Defocus, Dust, and
Combine Process in the Wind menu, see "Trail Settings" (page 137).

Spotlighting Settings

You can set up to three light sources (lights 1 to 3).
Notes
• The Spotlighting effect is not supported on the MVE-8000A.
• The BZDM-9050 Texture Lighting Software (for MVE-9000) is required to
set lights 2 and 3.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Speed Rate at which hue changes –12.00 to +12.00
Parameter Adjustment
Amp H Horizontal amplitude of the
wave
Freq H Horizontal frequency of the
wave
Amp V Vertical amplitude of the
wave
Freq V Vertical frequency of the
wave
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
–100.00 to +100.00
0.00 to 100.00
–100.00 to +100.00
DME Special Effect Operations
147