Sony MVS-8000X User Manual page 327

2
Recalling a snapshot in the Multifunction Flexi Pad control block
As an example, to recall a snapshot on the M/E-1 bank, use the following
procedure.
1
2
326
Snapshot Operations in the Multifunction Flexi Pad Control Block
Add attributes with the following buttons.
[TEMP ATTR] button: Set a temporary attribute. Set this to Off to add
an attribute.
[EFF DISS] button: Add the effect dissolve attribute.
[DUR xxx] button: Set the effect dissolve duration.
The current setting is shown by "xxx." When you press this button, the
memory recall section switches to numeric keypad input mode, and
you can enter the setting value.
[AUTO TRNS] button: Add the auto transition attribute.
[XHLD xxx] button: Add the bus cross-point hold attribute.
The affected bus is shown by "xxx."
For details of attributes, see "Snapshot Attributes" (page 309).
In the Multifunction bank Flexi Pad control block, press the [SNAPSHOT]
button.
This assigns the Multifunction Flexi Pad control block to snapshot
operations. The numeric display shows the last selected bank number and
the register number last recalled on the bank.
Press the region selection button corresponding to the region you want to
recall, turning it on. Multiple selections are also possible.
[M/E 1], [M/E 2], [M/E 3], [M/E 4], [P/P]: These select the
corresponding M/E-1, M/E-2, M/E-3, M/E-4, and PGM/PST regions.
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME channels.
[ALL]: This selects all regions.
[RTR]: This selects the Router region.
[MASTR]: This selects a master snapshot.
Notes
The regions that can be selected simultaneously are those assigned to the
region selection buttons in the memory recall section. (See "Assigning a
Region to a Region Selection Button in the Numeric Keypad Control Block
or Multifunction Flexi Pad Control Block" in Chapter 19 (Volume 3).)
It is not possible to select [MASTR] and other regions simultaneously. If
selected simultaneously, the master snapshot takes precedence.