Creating And Saving A Macro - Sony MVS-8000X User Manual

2
3

Creating and Saving a Macro

1
2
3
384
Macro Operations in the Standard Type Flexi Pad Control Block
Press the [Take] button.
This executes one event within the macro, then stops.
The number of events executed, as shown in the memory recall section
status display, is incremented by one.
Repeat step 2, executing the macro event by event.
When all events in the macro have been executed, the [Take] button goes
off.
In the Flexi Pad control block, press the [MCRO] button, turning it on.
This assigns the Flexi Pad control block to macro operations.
Select the bank of the register in which you want to save the macro.
For details of the method of operation, see step 2 in the previous item
"Recalling a Macro Register and Executing a Macro" (page 381).
Hold down the [MCRO] button in the Flexi Pad control block, and press
the button in the memory recall section showing the desired register name.
Take button
Status display
(Number of events executed/
total number of events)