Sony MVS-8000X User Manual page 111

To reverse the ripple range
When modulation mode is Radial, Both, or Shape: Press [Range Rev R],
When modulation mode is Both or Angular: Press [Range Rev A], turning
Other settings
You can turn [Lock], [Form], [Random], and [Range Envelope] on to do the
following.
• Stop the waves
• Select the wave shape
• Randomize the waveform
• Smooth the range envelope when the wave range is limited
For Lock, Form, Random, and Range Envelope functions, see "Wave settings"
(page 99).
Rings settings
You can set the degree of transition, the degree of randomness in the distance
moved by each block, the amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point, the starting angle,
and other parameters.
To apply the Rings effect
With the Rings menu displayed, use the following procedure.
1
110
DME Special Effect Operations
Knob Parameter Adjustment
3 Size A Amount of ripple modulation
along periphery
4 Offset A Center of modulation range
along periphery
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
turning it on.
it on.
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Transition Degree of transition
2 Random Degree of randomness in distance
moved by each block
3 Spiral Amount of movement toward
periphery accompanying transition
Setting values
0.00 to 100.00
–8.000 to +8.000
Setting values
0.000 to 100.000
0.000 to 100.000
–1.000 to +1.000