When entering macro editing mode with "Full Editing" selected
About operations in Full Editing mode, see "Macro Operations in the Simple
Type Flexi Pad Control Block" (page 388).
Banks and registers
To allow operations on the 99 registers, the standard type Flexi Pad control
block treats the registers in groups. These groups are called banks, and there
are 10 banks, numbered from 0 to 9.
For details of the correspondence between banks and registers, see "Banks
and Registers" (page 316).
Recalling a Macro Register and Executing a Macro
Carrying out a macro operation in the normal mode
Use the following procedure to recall a macro register.
1
In the Flexi Pad control block, press the [MCRO] button, turning it on.
Numeric display
MCRO button
Memory recall section
Macro Operations in the Standard Type Flexi Pad Control Block
UNDO button
STORE STATS button
Bank selection buttons
381