Sony MVS-8000X User Manual page 311

Clip event: Recall a frame memory clip immediately after the snapshot is
Auto play: Play a frame memory clip immediately after the snapshot is
Table of available attributes
The attributes that can be used depend on the region, as follows.
Attribute
Cross-point hold
Key disable
Effect dissolve
Auto transition
GPI outputs
Clip event
Auto play
Attribute display
You can view the attributes of a snapshot in the Snapshot menu.
For more details, see "Snapshot Operations in the Menus" (page 329).
Temporary attributes
When recalling a snapshot, you can temporarily apply attributes distinct from
the attributes set for each register. These are called "temporary attributes."
You can set temporary attributes when recalling a snapshot.
Bus override
If you recall a snapshot while holding down an A or B bus button, the selection
of the signal on the A or B bus does not change when the snapshot is recalled.
This function is called "bus override."
This function is effective when cross-point hold is off, and you want to
temporarily maintain the cross-point setting. When cross-point hold is on, the
above operation is not necessary.
310
Overview
recalled.
recalled.
Region
M/E-1, M/E-2, M/E-3,
M/E-4, and PGM/PST
Yes
Yes
Yes
Yes
Yes
No
No
Yes: Can be used No: Cannot be used
User 1 to User 8 DME ch 1 to
DME ch 8
Yes Yes
No No
Yes Yes
No No
Yes No
Yes No
Yes No