Sony MVS-8000X User Manual page 113

To fix the direction in which shards scatter
Press [Direction], turning it on.
Flying Bar settings
You can set the degree of transition, the degree of randomness in the distance
moved by each block, the direction of movement, the width of the partitions,
the degree of randomness in partition width, the partition angle, and other
parameters.
To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following procedure.
1
2
Blind settings
There are two modes: Bar and Wedge. You can set the number of rotations by
blocks, the perspective, the width and position of blocks, the direction, the
center position, and other parameters.
To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
2
112
DME Special Effect Operations
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Transition Degree of transition
2 Random Degree of randomness in distance
moved by each block
3 Angle Direction of movement
To set the partition method, press [Partition] and set the following
parameters.
Knob Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in partition
width
3 Angle Partition angle
In the <Mode> group, select [Bar] or [Wedge].
To make transition settings, press [Transition] and set the following
parameters.
Setting values
0.000 to 100.000
–100.000 to
+100.000
–8.000 to +8.000
Setting values
0.000 to 100.000
0.000 to 100.000
–8.000 to +8.000