Creating And Saving A Master Timeline With The Menu - Sony MVS-8000X User Manual

6
7
8

Creating and Saving a Master Timeline With the Menu

You can save a master timeline using the Effect >Master Timeline >Store
menu.
Recalling the Store menu
1
2
3
294
Creating and Saving a Master Timeline
The display shows the register number last used for master timeline
operation.
Press the [EDIT ENBL] button.
This assigns the memory recall section to keyframe effect editing
operations.
Press the [STOR] button, turning it on.
With the numeric keypad buttons, enter the number of the register (here
"1") in which you want to save the master timeline, and press the [ENTR]
button.
This saves M/E-2 register 15 and P/P register 11 in master timeline register
1. At the same time, the [MSTR RCLL] button lights green.
Do either of the following.
• In the menu control block, press the top menu selection button [EFF].
• In the numeric keypad control block, press the [EFF] button twice in
rapid succession.
The Effect menu appears.
Press VF1 'Master Timeline' and HF1 'Store.'
The Master Timeline >Store menu appears.
The status area shows the master timeline register names, register lock
status, register number for each region, and so on.
If required, press the following buttons in the status area to change the
region display.
M/E, P/P: indicate assignment of M/E-1 ("M/E1"), M/E-2 ("M/E2"), M/
E-3 ("M/E3"), M/E-4 ("M/E4"), and P/P ("P/P").
User: indicate assignment of User1 ("USR1"), User2 ("USR2"), User3
("USR3"), User4 ("USR4"), User5 ("USR5"), User6 ("USR6"),
User7 ("USR7"), and User8 ("USR8").