Sony MVS-8000X User Manual page 78

Knob
1
a) When set to a negative value, the image is stretched vertically, to become taller.
When set to a positive value, the image is stretched horizontally, to become wider.
Rotating the wipe crop pattern (Rotation)
1
In the <Rotation> group of the Wipe Crop menu, select one of the
following.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate the pattern at a fixed speed.
2
Depending on the selection in step 1, set the following parameter.
• When Angle is selected
Knob
1
a) –1.00 represents a whole turn counterclockwise, and +1.00 represents a whole turn
clockwise. 0.00 is the original state.
• When Speed is selected
Knob
1
a) –100.00 represents a speed of four whole turns counterclockwise per second, and +100.00
represents a speed of four whole turns clockwise per second. 0.00 is the stationary state.
Applying modulation to the wipe crop pattern (Modulation)
1
In the <Modulation> group of the Wipe Crop menu, select one of the
following.
H (horizontal modulation): Modulate the pattern to apply waving in the
horizontal direction.
V (vertical modulation): Modulate the pattern to apply waving in the
vertical direction.
2
Set the following parameters.
Knob
1
Parameter Adjustment
Aspect Aspect ratio
Parameter Adjustment
Angle Angle of pattern rotation
Parameter Adjustment
Speed Rotation rate of pattern
Parameter Adjustment
Amplitude Amplitude of modulation
Setting values
a)
–100.00 to +100.00
Setting values
a)
–8.00 to +8.00
Setting values
a)
–100.00 to +100.00
Setting values
0.00 to 100.00
DME Special Effect Operations
77