Background Settings - Sony MVS-8000X User Manual

Background Settings

Adds a color or inputs an external signal to the background of the image.
Notes
Signal selection for this purpose is not supported on the MVE-8000A.
Applying the Background effect
1
In the DME menu, select VF6 'Input/Output' and HF1 'Bkgd.'
The Bkgd menu appears.
2
Press [Bkgd], turning it on.
The Background effect is enabled. Only if Flat Color is selected in the
<Bkgd Fill> group, you can adjust the parameters with the knobs.
3
Set the following parameters.
Knob
1
2
3
Selecting the signal to insert in the background
When using the MVE-9000, you can select the signal to insert in the
background.
With [Bkgd] set on, use the following procedure.
1
In the <Bkgd Fill> group, select one of the following.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 79)
Ext Video: an external video signal input to the Ext IN connector
Notes
• "Mix Color" or "Ext Video" can only be applied to one of the
background, flex shadow (see page 68), trail (see page 137), and wind
(see page 145) effects.
If you select "Mix Color" or "Ext Video" in one of these settings, a
selection of "Mix Color" or "Ext Video" in any of the other effects is
disabled, and "Flat Color" is selected in its place.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
165