Transition Mode Settings For User Programmable Dme; Keyframe Creation And Editing In The Multifunction Flexi Pad Control Block - Sony MVS-8000X User Manual

Transition Mode Settings for User Programmable DME

To create an effect for user programmable DME, it is necessary to set the
transition mode.
Setting the transition mode
1
2
Keyframe Creation and Editing in the Multifunction
Flexi Pad Control Block
To create and edit a keyframe in the Multifunction Flexi Pad control block,
press the [EFF] button to switch to effect operation mode, then press the [EDIT
ENBL] button.
The [EDIT ENBL] button lights red, and the memory recall section switches to
the effect editing mode as shown in the following illustration.
274
Creating and Editing Keyframes
In the Key Frame menu, select HF4 'DME User PGM.'
The DME User PGM menu appears.
In the <Transition Mode> group, select the transition mode according to
the DME wipe action.
Single: select single transition mode.
Flip/Tumble: select the flip/tumble transition mode.
Dual: select dual transition mode.
P in P: select picture-in-picture mode.
Compress: select compress mode.
Frame I/O: select frame in-out transition mode.
Frame I/O H: select frame in-out transition mode in the horizontal
direction.
Frame I/O V: select frame in-out transition mode in the vertical direction.
For details of creating an effect for user programmable DME, see
"Creating User Programmable DME Patterns" in Chapter 6 (Volume 1).
Notes
Which DME channel is selected as the reference region (lit green) in the
numeric keypad control block is reflected in the <Transition Mode> group
display.