Sony MVS-8000X User Manual page 214

2
Using any of the following methods, select the device for which you want
to clear the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
Carry out any of the following operations as required.
• To clear the start point, press [Clear] in the <Start TC> group.
• To clear the stop point, press [Clear] in the <Stop TC> group.
• To clear the start delay time, press [Clear] in the <Delay> group.
This clears the setting of the start point, stop point, or start delay time.
Selecting Loop or Recue as the playback mode
You can set the device operation mode to loop or recue.
Loop: Carry out playback from the start point of a file to the stop point, then
indefinitely repeat playback from the start point.
Recue: Carry out playback from the start point of a file to the stop point, then
return to the start point and stop.
Notes
Loop and recue functions are only available when the EVS XT server is
operated with the video disk communications protocol.
In the Device menu, use the following procedure.
1
Press VF3 'DDR/VTR' and HF1 'Cueup & Play.'
The Device >DDR/VTR >Cueup & Play menu appears.
The status area shows the device number, register number, status
information, current time, start point, stop point, start delay time, and
playback mode.
2
Using any of the following methods, select the device.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
Parameter Setting
Dev Device number
Parameter Adjustment
Dev Device number
Control of VTRs, Extended VTRs, and Disk Recorders
Setting values
1 to 12
Setting values
1 to 12
213