Sony MVS-8000X User Manual page 96

Notes
On the MVE-8000A, Effect Gp 1 and Effect Gp 2 cannot be turned on at
the same time.
3
Press [Position/Size].
4
Set the mask source parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Knob Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
a) This setting value is not supported on the MVE-8000A.
• 16:9 mode
Knob Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
a) This setting value is not supported on the MVE-8000A.
5
To invert the mask source, press [Invert], turning it on.
6
As required, set the modifiers for the mask pattern.
• When turning [Aspect] on and adjusting the pattern aspect ratio
Knob Parameter
1 Aspect
Adjustment
Horizontal position
Vertical position
Size of mask
Softness of mask
Pattern number
Adjustment
Horizontal position
Vertical position
Size of mask
Softness of mask
Pattern number
Adjustment
Aspect ratio
Setting values
–8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
–6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
0.00 to 100.00
0.00 to 100.00
a)
21, 24, 304
Setting values
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
0.00 to 100.00
0.00 to 100.00
a)
21, 24, 304
Setting values
–100.00 to +100.00
DME Special Effect Operations
a)
95