Motion Decay Settings - Sony DVS-9000 System User Manual

Select one of the following in the <Combine Process> group.
Combine –> Trail: Add the Trail effect after the combine. As the trail
parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
Trail –> Combine: Add the Trail effect before the combine. Trails parameters
can be set independently for each channel.
Combine –> Trail

Motion Decay Settings

Note
When you turn on motion decay, if the Trail, Keyframe Strobe or Wind effect
is on, it automatically goes off.
Blurring image motion
1
In the DME menu, select VF5 'Light/Trail' and HF3 'Motion Decay.'
The Motion Decay menu appears.
2
Press [Motion Decay], turning it on.
This enables motion decay, and you can now use the knobs to adjust the
parameters.
3
Set the following parameter.
Knob
1
Parameter Adjustment
Video Decay Degree of blurring of the video
signal
Trail –> Combine
Setting values
0.00 to 100.00
DME Special Effect Operations
a)
531