Sony MVS-8000X User Manual page 164

Notes
There is no Radius setting when Line is selected in the <Spot Mode>
group.
To rotate the ring
1
Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring] was selected changes.
2
Set the following parameter.
Knob Parameter
3 Speed
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
To invert the lighted area
Press [Light Invert], turning it on.
The lighted area is inverted.
To add color to the light source
1
In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
2
In the <Fill Blending Mode> group, select how the light and image should
be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
3
If you selected Mix, select the fill color in the <Fill Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually varies.
4
According to the selection, set the following parameters.
• When you selected Flat Color
Knob Parameter
1 Luminance
2 Saturation
3 Hue
Adjustment
Rotation speed and direction
Adjustment
Luminance
Saturation
Hue
Setting values
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
a)
163