Sony MVS-8000X User Manual page 75

2
Flex shadow creation example
The flow of flex pattern creation will be explained using the following pattern
as an example.
1
2
3
4
5
74
DME Special Effect Operations
Adjust the following parameter.
Knob Parameter Adjustment
1 Density Density of combine shadow
Notes
• The Combine Shadow effect is applied to all shadows, not only the
sections where shadows overlap.
• Combine Shadow is enabled when the Flex Shadow effect and the global
effect Combiner are enabled. In this state, Combine Shadow remains
enabled even if the global effect is disabled.
• In Combine Shadow, the settings for the channel with the lowest number
among the channels being combined are enabled.
Press [Flex Shadow], turning it on.
In the <Flex Shadow> group, select [External].
Turn [Axis Loc] on and use knob 2 to set the Axis Loc V parameter so that
the center of the flex shadow deformation is at the bottom of the picture.
(For HD format and 16: 9 mode: Axis Loc V = –9.00)
The following steps will be easier if you display the flex shadow axis
graphic by pressing [Flex Shadow Axis] in the Graphic menu.
Press [V] in the <Invert> group, turning it on, to invert the flex shadow
horizontally.
Turn [Size] on and use knob 2 to set the Size V parameter so that the
shadow extends vertically.
Setting values
0.00 to 100.00