Sony MVS-8000X User Manual page 283

4
Changing the path type for Hue
1
2
Changing the path type for Xpt
1
2
282
Path Setting
Curve setting Hue change
OFF Does not change
Step Changes as with the Step setting
If you selected Spline as the path type, set the following parameters, using
the knobs.
Knob Parameter
1 Tens
2 Bias
3 Cont
Press the Hue path type indication for the item that you want to change.
Turn knob 1 to change the Hue path type.
The path type indications shown in the menu represent the change in hue
as seen on a Vectorscope.
CW: Rotate clockwise.
CCW: Rotate counterclockwise.
Short: The hue changes in whichever of the clockwise and
counterclockwise directions is shorter.
Long: The hue changes in whichever of the clockwise and
counterclockwise directions is longer.
Press the Xpt path type indication for the item that you want to change.
A path selection window appears.
Press the indication for the desired path type, to select it.
Xpt Hold off: When replaying a keyframe, change the inputs to the
settings saved in memory.
Xpt Hold on: When replaying a keyframe, do not change the
inputs.
Adjustment
Spline interpolation tension
Spline interpolation bias
Spline interpolation continuity
Xpt change
Hold
Is not affected
Setting values
–4.00 to +4.00
–4.00 to +4.00
–4.00 to +4.00