Sony MVS-8000X User Manual page 83

3
4
5
Masking the Defocus effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 94).
82
DME Special Effect Operations
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
Notes
On the MVE-8000A, the Defocus and Glow effects cannot be enabled at
the same time. The effect which was turned on most recently is enabled.
In the <Defocus Mode> group, select the signal to which to apply the
defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
Set the parameters.
• When Video/Key is selected
Knob Parameter
1 H
2 V
3 All
• When Video is selected
.
Knob Parameter Adjustment
1 H Horizontal defocusing of video
signal
2 V Vertical defocusing of video
signal
3 All Horizontal and vertical
defocusing of video signal
To cancel black level leaking that can occur at the edge of the screen when
the Defocus effect is enabled, press [Clean Defocus], turning it on.
Adjustment
Horizontal defocusing of video
and key signals
Vertical defocusing of video and
key signals
Horizontal and vertical
defocusing of video and key
signals
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown