Netbackup 5330 Compute Node Ethernet Port Configurations - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

Storage shelves and disk drives

Hide thumbs Also See for NetBackup 5330:

Installation manual (102 pages)

Configuration manual (63 pages)

Appliance product description (42 pages)

Table Of Contents

Table of Contents

NetBackup 5330 compute node Ethernet port

configurations

All PCIe slots are factory-populated. Each slot contains either a Fibre Channel (FC)

host bus adapter (HBA) card or an Ethernet network interface card (NIC). Slots 1

and 4 are reserved exclusively for attachment to the Primary Storage Shelf.

The PCIe card configurations for the NetBackup 5330 compute node are shown in

the table.

Available PCIe slot configurations for the NetBackup 5330

Table 1-1

compute node

Option

Slot 1

8 Gb FC

HBA

8 Gb FC

HBA

8 Gb FC

HBA

8 Gb FC

HBA

8 Gb FC

HBA

The rear panel of the NetBackup 5330 compute node contains six PCIe slots, which

are populated according to five different supported configurations. The PCIe slot

configuration determines the number of Ethernet ports that are available.

Note the locations of each Ethernet port that is located on the rear panel of the

compute node.