Netbackup 5330 Compute Node Pcie Card Configurations - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

10 Hardware overview

NetBackup 5330 compute node PCIe card configurations

NetBackup 5330 compute node PCIe card
configurations
Slots 6 and 7 are currently unconfigured and reserved for future use. Slots 8 through
11 contain blank carriers to maintain airflow.
The rear panel of the compute node contains embedded ports and PCIe card slots.
The embedded ports include the following (with numbers associating the ports to
the items in the bulleted list):
Four 1Gb Ethernet ports (Item 1)
■
One Video Graphics Array (VGA) port (Item 2)
■
One serial port (for Veritas Technical Support use only) (Item 3)
■
Three USB ports (Item 4)
■
One Intelligent Platform Management Interface (IPMI) port for remote
■
management (Item 5)
Two 10Gb Ethernet ports (Item 6)
■
Two power supply modules are installed in the lower left corner of the rear panel.
One of the power supplies must be operational at all times. Turn off the device if
both power supplies are not working properly.
Input power for the compute node can be 120VAC or 220VAC.
The rear panel of the compute node contains six PCIe slots that are numbered 1
to 6. Slots 1, 2, and 3 are located in PCIe Riser Assembly 2. Slots 4, 5, and 6 are
located in PCIe Riser Assembly 1.