VERITAS NetBackup 5330 Appliance Hardware Installation Manual page 36

36 Hardware installation procedures
Installing a Primary Shelf or an Expansion Shelf
4
Locate the spacers and place them near the rail screws.
Note: Two types of spacers may ship with the storage shelves. Some spacers
are round, while other spacers are square. Both types of spacers are galvanized
steel. Both types of spacers have the same usage and functionality.
5
To align the rail with the front and the rear RUs, do the following:
Locate the RUs on the front and the rear of the rack that you plan to use.
■
Note: The rear of the rack only uses the two lower RUs for installation. The
front of the rack uses three RUs.
Use a flathead screwdriver to loosen the inside screws of the rail.
■