Installing The Sfps Into The Fibre Channel (Fc) Ports - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

Installing the SFPs into the Fibre Channel (FC)
ports
14
Lift up on the rail release buttons and slide the compute node completely into
the rack.
15
Secure the compute node to the rack on each side by tightening the thumbscrew
on the front.
Four small form-factor pluggable (SFP) transceivers are provided. You must insert
them into the four Fibre Channel (FC) ports in slots 1 and 4 in the compute node
rear panel.
To install the SFPs
1
Locate the SFPs.
2
Identify the FC ports in slots 1 and 4.
Slot 1

Installing the SFPs into the Fibre Channel (FC) ports

2 1
Hardware installation procedures
Slot 4
2 1
47