VERITAS NetBackup 5330 Appliance Hardware Installation Manual page 12

12 Hardware overview
NetBackup 5330 compute node Ethernet port configurations
eth0
All NetBackup 5330 Appliances include the following ports, which are built in along
the base of the rear panel:
1-GbE ports: eth0, eth1, eth2, and eth3
■
10-GbE ports: eth4 and eth5
■
The 10-Gb Ethernet network interface cards that are installed in the PCIe slots
contain additional ports. The number of ports depends on the PCIe slot configuration
of your compute node.
Table 1-2 shows the available Ethernet ports for each PCIe slot configuration.
NetBackup 5330 compute node PCIe Ethernet port configurations
Table 1-2
Option
A (four 10-Gb Ethernet cards)
B (three 10-Gb Ethernet cards)
C (two 10-Gb Ethernet cards)
D (one 10-Gb Ethernet card)
E (no 10-Gb Ethernet cards)
eth7 eth6
eth9 eth8
eth1 eth2 eth3
Slot and Ethernet port numbers
Slot 2: eth8 (right), eth9 (left)
■
Slot 3: eth6 (right), eth7 (left)
■
Slot 5: eth10 (right), eth11 (left)
■
Slot 6: eth12 (right), eth13 (left)
■
Slot 2: eth8 (right), eth9 (left)
■
Slot 3: eth6 (right), eth7 (left)
■
Slot 5: eth10 (right), eth11 (left)
■
Slot 2: eth8 (right), eth9 (left)
■
Slot 3: eth6 (right), eth7 (left)
■
Slot 3: eth6 (right), eth7 (left)
■
N/A
eth13 eth12
eth11 eth10
eth4 eth5