28
Hardware pre-installation requirements
Unpacking a NetBackup 5330 compute node
Warning: The compute node weighs 30kg (66 lbs). Be sure that you have adequate
personnel or a mechanical lift to move the compute node.
To unpack the compute node
1
Open the cardboard container.
2
Remove the Open Me First box and the posters at the top of the container.
3
Remove the rail templates from the Open Me First box.
The template shows where the left-hand rail and the right-hand rail fit into the
front and the rear of the rack.
4
Remove the bezel.
5
Remove the mounting rails.