Unpacking A Netbackup 5330 Compute Node - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

Unpacking a NetBackup 5330 compute node

5
Remove the front and the rear rack templates. You will use these to locate
holes in the rack where screws and pins are placed.
6
Remove any foam, air bags, or other cushioning materials.
7
Remove the extension bracket and screws.
8
Remove the bezel and set it aside.
9
Remove the mounting rails and set them aside.
10
Remove the four metal handles and set them aside.
11
Remove any fasteners, power cords, and cables and set them aside.
12
Remove the storage shelf from the shipping container.
The compute node is shipped in a separate container from the storage shelves.
Both types of devices are shrink-wrapped together. Veritas recommends that you
have a table nearby where you can safely place the contents of the container.
Hardware pre-installation requirements
Unpacking a NetBackup 5330 compute node
27