Accessing And Using The Remote Management Interface - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

78 Hardware installation procedures

Accessing and using the Remote Management interface

Accessing and using the Remote Management
interface
The IPMI Web interface is known as Remote Management in NetBackup 5220 and
later appliances: You can use the Remote Management interface to log on to the
NetBackup Appliance Shell Menu.
Before you use the Remote Management interface, the following prerequisites must
be met:
The Remote Management interface must first be configured using the NetBackup
■
Appliance Shell Menu.
At least one power cable must be connected to a functioning power source.
■
At least one user must be enabled to use the LAN channel(s).
■
To access and use the IPMI Web interface from a remote computer
1 Log on to a remote computer in the network and open a supported Windows
browser.
2
Enter the remote management port IP address assigned to the remote
management port. The following page appears:
3
Enter your login information. The default user name is sysadmin. The default
password is P@ssw0rd, where 0 is the number zero.
Click Login.