Velocity 7330 Compute Node Ethernet Port Configurations - VERITAS Velocity 7330 Hardware Installation Manual

Velocity 7330 compute node Ethernet port configurations

Figure 1-4
All PCIe slots are populated with an 8 Gb Fibre Channel (FC) host bus adapter
(HBA) card or a 10 Gb Ethernet network interface card (NIC). Slots 1 and 4 are
reserved exclusively for attachment to the Primary Storage Shelf.
Table 1-3 describes the PCIe slot configuration for the Velocity 7330 Appliance.
PCIe slot configuration for the Velocity 7330 Appliance compute
Table 1-3
node
Slot 1 Slot 2
8 Gb FC HBA 10 GbE NIC
See "Velocity 7330 compute node Ethernet port configurations"
Veritas Velocity 7330 Appliances include the following Ethernet ports, which are
built in along the base of the rear panel:
1-GbE ports: eth0, eth1, eth2, and eth3
■
10-GbE ports: eth4 and eth5
■
In addition, the Veritas Velocity 7330 Appliance compute node also includes
additional PCIe card-based 10 Gb Ethernet ports.
The following picture shows the location of all Ethernet ports on the rear panel of
the compute node, including the PCIe card-based ports.
Velocity 7330 Appliance compute node rear panel
PCIe slot configurations
Riser 2
Slot 3
Slot 2
Slot 1
Slot 3 Slot 4
10 GbE NIC 8 Gb FC HBA
Hardware overview
Riser 1
Slot 6
Slot 5
Slot 4
Slot 5 Slot 6
10 GbE NIC 10 GbE NIC
on page 12.
12