The rail ends contain unique points for engagement in the rack.
■
The square protrusion at the top should be placed in the top hole of the
RU. The round blue protrusion at the bottom should be placed in the bottom
hole of the RU.
5
At the rear upper RU of the rack, insert the rear of the rail into the top and the
bottom holes of the RU.
6
Extend the rail toward the front of the rack and insert it into the top and the
bottom holes of the RU.
7
Repeat steps 5 and 6 to install the right rail.
RIGHT
Installing the NetBackup 5330 compute node
LEFT
Hardware installation procedures
45