VERITAS NetBackup 5330 Appliance Hardware Installation Manual page 57

Connecting a second Expansion Shelf to an existing 3TB Expansion Shelf and a 3TB Primary Shelf
To connect a second Expansion Shelf to an existing Expansion Shelf
1
Verify that the compute node, the Primary Shelf, and the existing Expansion
Shelf are turned off.
2
Verify that your existing Primary Shelf and Expansion Shelf are cabled correctly,
as shown.
Four SAS cables connect the Primary Shelf to the Expansion Shelf.
A
B
A
B
Note: The following illustrations show only the specific cable and action(s)
required. Cables that are already connected are shown in black. The cable for
each step is shown in color. A yellow circle represents a new connection. A
red circle indicates a cable that needs to be removed from a specified port.
Primary Storage Shelf
Expansion Storage Shelf
Hardware installation procedures 57