VERITAS NetBackup 5330 Appliance Hardware Installation Manual page 53

To connect one new Expansion Shelf to a Primary Shelf
1
Connect the two SAS ports on canister A of the Primary Shelf to the left SAS
ports on canisters A and B of the Expansion Shelf
Primary Storage Shelf
A
B
Expansion Storage Shelf
A
B
2
Connect the two SAS ports on canister B of the Primary Shelf to the two SAS
ports on the Expansion Shelf. Do not use the single SAS port on the right-hand
side of each Expansion Shelf canister.
3
Connect two power cords to the Expansion Shelf.
Hardware installation procedures
Connecting one Expansion Shelf to a Primary Shelf
53