Installing A Primary Shelf Or An Expansion Shelf - VERITAS NetBackup 5330 Appliance Hardware Installation Manual

34 Hardware installation procedures

Installing a Primary Shelf or an Expansion Shelf

Installing a Primary Shelf or an Expansion Shelf
This installation procedure can be used for either storage shelf. For the systems
that include an Expansion Shelf, install that unit first followed by the Primary Shelf.
There must be a minimum depth of 76 cm (30 in.) between the front of the rack and
the rear of the rack.
Veritas recommends that two people install the rails; one person at the back of the
rack and one at the front. Veritas also recommends that three people lift and place
the storage shelf into the mounted rails.
Warning: To avoid potential equipment damage and personal injury, do not install
disk drives into the storage shelves before mounting them into the rack. The added
weight of the disk drives hinders the ability to safely install the storage shelves.