Call Home Default Settings - Cisco Catalyst 4500 series Administration Manual

Call Home Default Settings

Total Failed
Total Ratelimit
Last call-home message sent time: n/a
Call Home Default Settings
Table 68-2
Table 68-2
Parameters
Call Home feature status
User-defined profile status
Predefined Cisco TAC profile status
Transport method
Message format type
Destination message size for a message sent in long text, short text, or XML format 3,145,728
Alert group status
Call Home message severity threshold
Message rate limit for messages per minute
Alert Group Trigger Events and Commands
Call Home trigger events are grouped into alert groups, with each alert group assigned CLI commands
to execute when an event occurs. The CLI command output is included in the transmitted message.
Table 68-3
and the executed CLI commands for the alert group.
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
68-18
0
Config 0
Diagnostic 0
Environment 0
Inventory 0
SysLog 0
Test 0
Request 0
Send-CLI 0
-dropped 0
Config 0
Diagnostic 0
Environment 0
Inventory 0
SysLog 0
Test 0
Request 0
Send-CLI 0
lists the default Call Home settings.
Default Call Home Settings
lists the trigger events included in each alert group, including the severity level of each event
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Chapter 68 Configuring Call Home
Default
Disabled
Active
Inactive
E-mail
XML
Enabled
1 (normal)
20
OL_28731-01