Calibrating The Detector; Aligning The Torch; Setting Operating Conditions - Agilent Technologies 700 Series User Manual

Calibrating the Detector

For detailed information on how to prepare the calibration solution
and perform the wavelength calibration procedure see the ICP
Expert II Help:
1
2
3
4

Aligning the Torch

You now need to align the torch viewing position before using a new
method. For detailed information on how to align the torch, see the
ICP Expert II Help:
1
2
3

Setting Operating Conditions

You now need to find, and set, the optimum operating conditions. For
detailed information, see the ICP Expert II Help:
1
2
3
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
Click Start > All Programs > ICP Expert II > Help.
Expand How to, and then expand Prepare the instrument for
use.
Click Prepare the wavelength calibration solution to make the
required solution.
Click Perform a wavelength calibration.
Click Start > All Programs > ICP Expert II > Help.
Expand How to, and then expand Prepare the instrument for
use.
Click Perform a torch alignment scan.
Click Start > All Programs > ICP Expert II > Help.
Expand How to, and then expand Prepare the instrument for
use.
Click Set the operating conditions.
Operation
37