Processing details
• These instructions convert the single-precision real number in the device specified by (s) to 32-bit unsigned binary data,
and store the converted data in the device specified by (d).
• After conversion, the first digit after the decimal point of the single-precision real number is rounded off.
• When an input value is set using the engineering tool, a rounding error may occur. For the precautions on setting an input
value using the engineering tool, refer to the following.
Page 49 Precautions
The following program example converts, when M0 turns on, the single-precision real number stored in D0 and D1 to 32-bit
unsigned binary data, and stores the converted data in D100 and D101.
SM402
M0
Operation error
Error code
Description
(SD0)
3401H
The single-precision real number in the device specified by (s) is out of the range, 0 to 4294967295.
3402H
An unusual number is set to (s).
• The single-precision real number set to (s) is not within the following range:
-126
|(s)|<2
0, 2
• The value set to a device or label is -0, a subnormal number, NaN (not a number), or .
EMOVP
E123456.7
D0
(s)
(d)
FLT2UDINT
D0
D100
128
(s)
b31
∙∙∙
b16
b15
∙∙∙
b0
D1, D0
47F1H
205AH
(123456.7)
6.6 Data Conversion Instructions
(d)
b31
∙∙∙
b16
b15
∙∙∙
b0
D101, D100
0001H
E241H
(123457)
6 BASIC INSTRUCTIONS
6
393