Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 119

■Reading the module model name
Instruction symbol Processing details
TYPERD Reads the module model name mounted on the slot specified by (H), and stores the model name in
the device areas specified by (d) and later.
TYPERDP
■Reading module specific information
Instruction symbol Processing details
UNIINFRD Reads the module information by the number of points specified by (n) from the module specified
by (H), and stores the information in the device areas specified by (d) and later.
UNIINFRDP
Routing information instructions
■Reading routing information
Instruction symbol Processing details
S.RTREAD Reads the data set by routing parameters.
SP.RTREAD
■Registering routing information
Instruction symbol Processing details
S.RTWRITE Registers the routing information to the area specified by a routing parameter.
SP.RTWRITE
Logging instructions
■Setting/resetting trigger logging
Instruction symbol Processing details
LOGTRG Generates a trigger for trigger logging. Data sampled for the number of records (specified in the
trigger logging setting parameter using the engineering tool) are stored in the data logging file.
LOGTRGR Resets the trigger condition.
Program control instructions
■Changing the program execution type to standby type
Instruction symbol Processing details
PSTOP Changes the type of the specified program to standby type.
PSTOPP
■Changing the program execution type to standby type (output off)
Instruction symbol Processing details
POFF Turns off the coil of the OUT instruction used in the specified program and changes the type of the
specified program to standby type.
POFFP
■Changing the program execution type to scan execution type
Instruction symbol Processing details
PSCAN Changes the type of the specified program to scan execution type.
PSCANP
Reference
Page 1063
TYPERD(P)
Reference
Page 1067
UNIINFRD(P)
Reference
Page 1072
S(P).RTREAD
Reference
Page 1074
S(P).RTWRITE
Reference
Page 1076 LOGTRG
Page 1078 LOGTRGR
Reference
Page 1079 PSTOP(P)
Reference
Page 1081 POFF(P)
Reference
Page 1083 PSCAN(P)
2 CPU MODULE INSTRUCTIONS
2.3 Application Instructions
2
117