Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 121

Predefined protocol support function instruction
■Executing the registered protocols
Instruction symbol Processing details
SP.ECPRTCL Executes the protocol specified by the communication protocol support tool of the engineering tool.
SLMP frame send instruction
■Sending an SLMP frame
Instruction symbol Processing details
SP.SLMPSND Sends SLMP messages to the SLMP-compatible device.
File transfer function instructions
■Sending FTP client files
Instruction symbol Processing details
SP.FTPPUT Sends files in the CPU module, which are specified by (s2), to the folder path of the FTP server,
which is specified by (s3).
■Retrieving FTP client files
Instruction symbol Processing details
SP.FTPGET Retrieves files on the FTP server, which are specified by (s2), to the folder path of the CPU module,
which is specified by (s3).
Reference
Page 1109
SP.ECPRTCL
Reference
Page 1117
SP.SLMPSND
Reference
Page 1123 SP.FTPPUT
Reference
Page 1128 SP.FTPGET
2 CPU MODULE INSTRUCTIONS
2.4 Built-in Ethernet Function Instructions
2
119