Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 134

■Reading data from the programmable controller (Q series-compatible)
Instruction symbol
J.ZNRD
JP.ZNRD
■Writing data to the programmable controller (Q series-compatible)
Instruction symbol
J.ZNWR
JP.ZNWR
■Remote RUN/STOP
Instruction symbol
J.REQ
JP.REQ
G.REQ
GP.REQ
■Reading/writing clock data
Instruction symbol
J.REQ
JP.REQ
G.REQ
GP.REQ
CC-Link dedicated instructions
■Reading data from the target station
Instruction symbol
J.RIRD
JP.RIRD
G.RIRD
GP.RIRD
■Writing data to the target station
Instruction symbol
J.RIWT
JP.RIWT
G.RIWT
GP.RIWT
• When the target station is QSCPU, the following network common instructions cannot be used.
SEND, RECV, RECVS, J(P).ZNRD, J(P).ZNWR, and REQ (remote RUN/STOP)
• Data cannot be written from the CPU module on another station to the QSCPU by using the following
network common instructions.
WRITE, SWRITE, REQ (reading/writing clock data), and RIWT
• If the CPU module on the target station is AnUCPU, A2USCPU(-S1), or A2ASCPU(-S1) when the
J(P).ZNRD or J(P).ZNWR instruction is executed, the CPU module must be the one with the following
version or later.
AnUCPU: Version AY (manufactured in July 1995) or later
A2USCPU(-S1): Version CP (manufactured in July 1995) or later
3 MODULE DEDICATED INSTRUCTIONS
132
3.1 Network Common Instructions
Processing details
Reads data in units of words from a device in the programmable controller of another station.
Processing details
Writes data in units of words to a device in the programmable controller of another station.
Processing details
Executes remote RUN or STOP for the programmable controller of another station.
Processing details
Reads/writes clock data from/to the programmable controller of another station.
Processing details
Reads the specified number of points of data from a device of the target station.
Processing details
Writes the specified number of points of data to a device of the target station.
Reference
Page 1501 J(P).ZNRD
Reference
Page 1506 J(P).ZNWR
Reference
Page 1511 J(P).REQ,
G(P).REQ
Reference
Page 1518 J(P).REQ,
G(P).REQ
Reference
Page 1525 J(P).RIRD,
G(P).RIRD
Reference
Page 1530 J(P).RIWT,
G(P).RIWT