Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 131

■Pausing a block
Instruction symbol Processing details
PAUSE [BL] Temporarily stops the step sequence in the specified block.
■Restarting a block
Instruction symbol Processing details
RSTART [BL] Releases the temporary stop, and restarts the sequence from the step where the sequence was
stopped in the specified block.
■Activating a step
Instruction symbol Processing details
SET [S/BL\S] Activates the specified step.
■Deactivating a step
Instruction symbol Processing details
RST [S/BL\S] Deactivates the specified step.
■Switching a target block
Instruction symbol Processing details
BRSET Specifies an SFC control instruction target block No.
SFC dedicated instruction
■Creating a dummy transition condition
Instruction symbol Processing details
TRAN A dummy output which satisfies a transition condition
Reference
Page 1429 PAUSE
[BL]
Reference
Page 1431 RSTART
[BL]
Reference
Page 1433 SET [S/
BL\S]
Reference
Page 1435 RST [S/
BL\S]
Reference
Page 1437 BRSET
Reference
Page 1439 TRAN
2 CPU MODULE INSTRUCTIONS
2.9 SFC Program Instructions
2
129