Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 516

Processing details
• These instructions transfer the 32-bit binary data in the device specified by (s) to the (n) points of the device specified by
(d).
b31 ∙∙∙
(s)+1, (s) 1234567H
• When the number of digits is specified for the data in the device specified by (s), only the data corresponding to the
specified digits are transferred. When K5Y0 is specified in (s), the lower 20 bits (five digits) of the word device specified by
(s) are transferred.
Y1F ∙ ∙ ∙ Y14 Y13
(1)
(1) Ignored.
(2) Data of 20 bits (5 digits)
(3) Filled with 0s.
• When the number of digits is specified for the data in the device specified by (d), the data corresponding to the specified
digits are transferred. When K5Y0 is specified in (d), the lower 20 bits (five digits) of the word device specified by (s) are
transferred. When the number of digits is specified for both data in the devices specified by (s) and (d), the data
corresponding to the digits specified in (d) are transferred.
(s)+1
b31 ∙ ∙ ∙ b20 b19
0
Y14×((n)-1)+(14-1)
∙ ∙ ∙
(2)
(1) Data (20 bits (5 digits) specified by (d))
(2) Data of 20 bits (5 digits)
• If (n) is 0, no processing is performed.
Operation error
There is no operation error.
6 BASIC INSTRUCTIONS
514
6.7 Data Transfer Instructions
(d)+1, (d)
(d)+3,
(d)+2
b0
(d)+5,
(d)+4
(d)+2(n)-1, (d)+2(n)-2
∙ ∙ ∙
(2)
b31 ∙ ∙ ∙ b20 b19
0
0
b31 ∙ ∙ ∙ b20 b19
0
(3)
(s)
b15
··· ···
(1)
...
Y14×((n)-1)
Y27 ∙ ∙ ∙
b31 ∙∙∙ b0
1234567H
1234567H
1234567H (n)
1234567H
Y0
(s)+1, (s)
∙ ∙ ∙ b0
(d)+1,
(d)+3,
∙ ∙ ∙ b0
(d)+2(n)-1,
(2)
b0
(d)+1
Y20 Y1F ∙ ∙ ∙ Y14Y13 ∙ ∙ ∙
(2)
(d)
(d)+2
(d)+2(n)-2
(d)
Y10 YF Y0
···
(2)