Settings - ABB Relion Technical Manual

1MRK 502 048-UUS A
14.1.3.4
Table 352: CMMXU Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
GlobalBaseSel 1 - 6
ILDbRepInt 1 - 300
ILMax 0 - 500000
ILRepTyp Cyclic
Dead band
Int deadband
ILAngDbRepInt 1 - 300
Table 353: CMMXU Non group settings (advanced)
Name Values (Range)
ILZeroDb 0 - 100000
ILHiHiLim 0 - 500000
ILHiLim 0 - 500000
ILLowLim 0 - 500000
ILLowLowLim 0 - 500000
ILMin 0 - 500000
ILLimHys 0.000 - 100.000
Table continues on next page
Technical manual
Table 351: CMMXU Output signals
Name Type
I_A REAL
IA_RANGE INTEGER
IA_ANGL REAL
I_B REAL
IB_RANGE INTEGER
IB_ANGL REAL
I_C REAL
IC_RANGE INTEGER
IC_ANGL REAL

Settings

Unit Step
- -
- 1
Type 1
A 1
- -
Type 1
Unit Step
m% 1
A 1
A 1
A 1
A 1
A 1
% 0.001
Description
IA Amplitude
Phase A current magnitude range
IA Angle
IB Amplitude
Phase B current magnitude range
IB Angle
IC Amplitude
Phase C current magnitude range
IC Angle
Default Description
Disabled Disable/Enable Operation
1 Selection of one of the Global Base Value
groups
10 Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
1300 Maximum value
Dead band Reporting type
10 Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Default Description
500 Zero point clamping
1200 High High limit (physical value)
1100 High limit (physical value)
0 Low limit (physical value)
0 Low Low limit (physical value)
0 Minimum value
5.000 Hysteresis value in % of range and is common
for all limits
Section 14
Monitoring
515